How to Fix an iPhone Screen: Step-by-Step Guide

Fixing an iPhone screen is relatively simple if you have the right tools and a bit of patience. First, get a replacement screen and the necessary tools, which usually include a pentalobe screwdriver, a plastic opening tool, and a suction handle. Once you have these, turn off your iPhone and remove the two screws next to the charging port. Use the suction handle to gently lift the screen, and then disconnect the cables using the plastic opening tool. Finally, replace the old screen with the new one, reconnect the cables, and reassemble your iPhone.

After you’ve completed the screen replacement, your iPhone should look and function as good as new. Just remember to test the screen’s functionality before you fully reassemble your device to ensure everything is in working order.


Cracked iPhone screens are a common headache for many users. Whether it’s from a drop, a bump, or just general wear and tear, a broken screen can be a major inconvenience. Not only does it affect the appearance of your device, but it can also hinder its functionality. For those who rely on their iPhone for daily tasks, a broken screen can disrupt your routine and productivity.

But fear not! Fixing an iPhone screen is not as daunting as it may seem. With a little bit of guidance, the right tools, and some patience, you can restore your beloved device to its former glory. It’s a handy skill to have and could save you a trip to the repair shop and a hefty service fee. This task is relevant to anyone with an iPhone and a desire to tackle basic repairs themselves. So, let’s gear up and learn how to fix that pesky iPhone screen!

Step by Step Tutorial to Fix an iPhone Screen

Before we begin, ensure you have a clean, well-lit workspace and all necessary tools at hand. This tutorial will guide you through each step to replace that cracked screen with a brand-spanking new one.

Step 1: Gather Your Tools

First things first, you’ll need the right tools. Usually, a pentalobe screwdriver, a plastic opening tool, and a suction handle will do the trick.

Having the proper tools is essential for a successful screen replacement. You can purchase these tools online or at your local electronics store. Ensure your new screen is compatible with your iPhone model.

Step 2: Turn Off Your iPhone

Before you start, make sure your iPhone is turned off to prevent any electrical damage or data loss.

Turning off your phone is a crucial safety step. To turn off your iPhone, hold down the power button until you see “slide to power off,” then swipe the slider.

Step 3: Remove the Screws

Use the pentalobe screwdriver to remove the two screws located on either side of the charging port.

Keep these screws in a safe place; you’ll need them when you reassemble your phone. They are tiny and easy to lose, so maybe put them in a small container.

Step 4: Open the iPhone

Attach the suction handle to the bottom of your screen and gently pull up to create a small gap between the screen and the phone’s body.

Be gentle during this step. You don’t want to damage any internal components. Use the plastic opening tool to carefully pry the screen open.

Step 5: Disconnect the Cables

Once the screen is lifted, use your plastic opening tool to disconnect the various cables attaching the screen to the phone’s body.

It’s important to disconnect these cables properly to avoid damaging the connectors. Look closely and unlatch the connectors carefully.

Step 6: Replace the Old Screen

Remove the old screen and position the new screen. Then, reconnect the cables you disconnected in the previous step.

Make sure the new screen sits flush with the body of the phone, and the cables click securely into place.

Step 7: Reassemble Your iPhone

Once the new screen is connected, carefully lower it back into place. Replace the two screws next to the charging port to secure the screen.

Do not over-tighten the screws; they just need to be snug. Once everything is back together, turn on your iPhone and test the screen to ensure everything is working correctly.


Cost-EffectiveBy fixing the screen yourself, you can save quite a bit of money compared to going to a repair shop or buying a new phone.
Skill DevelopmentLearning to fix your own iPhone screen can be empowering and gives you a useful skill that can come in handy in the future.
Quick SolutionInstead of waiting for days at a repair shop, you can fix your screen in a couple of hours and have your phone back in use.


Risk of DamageIf you’re not careful, you could cause further damage to your iPhone while attempting to fix the screen.
Warranty VoidIf your iPhone is under warranty, attempting a DIY screen repair could void it.
Time-ConsumingIt takes time and patience to fix an iPhone screen, which might not be ideal for everyone.

Additional Information

When fixing your iPhone screen, there are a few additional tips to keep in mind. Firstly, make sure you’re working in a clean, dust-free environment to avoid any particles getting trapped under the new screen. Secondly, be extra careful with the screws and small components – they’re easy to lose and can be a nightmare to find if they fall on the floor. Thirdly, if you’re feeling unsure at any point, there are plenty of video tutorials online that can help guide you through the process visually.

Remember, taking your time and being meticulous with your work will yield the best results. Lastly, if you do encounter issues along the way, professional help is always an option. Fixing an iPhone screen can seem daunting, but with the right approach, it’s definitely achievable.


  1. Gather your tools: pentalobe screwdriver, plastic opening tool, suction handle.
  2. Turn off your iPhone to avoid damage or data loss.
  3. Remove the two screws next to the charging port with the pentalobe screwdriver.
  4. Use the suction handle and plastic opening tool to gently open the iPhone.
  5. Disconnect the cables attaching the screen to the phone’s body.
  6. Replace the old screen with the new one and reconnect the cables.
  7. Reassemble your iPhone and replace the screws to secure the screen.

Frequently Asked Questions

What tools do I need to fix an iPhone screen?

A pentalobe screwdriver, a plastic opening tool, and a suction handle are the primary tools needed for this repair.

Can I fix my iPhone screen if I’ve never done it before?

Yes, as long as you follow instructions carefully and take your time, even beginners can successfully replace an iPhone screen.

How do I know if I need to replace my iPhone screen?

If your screen is cracked, unresponsive, or has display issues, it likely needs to be replaced.

Will fixing my iPhone screen myself void the warranty?

Performing repairs yourself can void the warranty if your iPhone is still covered. Always check the warranty terms before proceeding.

What should I do if I’m not confident about fixing the screen myself?

If you’re not comfortable, it’s best to take your iPhone to a professional repair technician to avoid any potential damage.


Fixing an iPhone screen can be a rewarding experience that saves you money and equips you with a valuable skill. While there are risks involved, taking the time to learn and execute the process carefully can lead to a successful repair.

Remember, patience is key, and having the right tools and instructions will make the job much easier. If you’re not confident about doing it yourself, there’s no shame in reaching out to a professional for help. Either way, knowing how to fix an iPhone screen is a handy piece of knowledge for any iPhone user.